From: eLinux.org

R-Car

Jump to R-Car boards pages

Start.Now (Stout)

Porter

SILK

Contents

• 1 Introduction
• 2 R-Car SoCs
• 3 R-Car Boards
  • 3.1 Generation 1
  • 3.2 Generation 2
• 4 R-Car Linux
  • 4.1 Upstream
  • 4.2 R-Car Community
  • 4.3 LTSI (Long Term Support Initiative)
  • 4.4 Renesas Stable R-Car BSP Tree
• 5 R-Car U-Boot
• 6 R-Car Yocto
• 7 R-Car Tizen
• 8 R-Car Android

Introduction

This is starting page for Embedded Linux on Renesas R-Car family of automotive embedded SoCs. Main goal is to make information on R-Car SoCs friendly, easy to access for embedded developers, enthusiasts. It does not aim to replace official Renesas support.

Links below could be used to get familiar with Renesas Automotive SoCs and R-Car Concortia:

• Renesas Automotive Products / Solutions
• Renesas Car Information Terminal Applications
• R-Car Consortium

Detailed information regarding R-Car SoCs (including roadmap, technical and marketing documents, BSPs and middleware) can be obtained directly from Renesas representative.

R-Car SoCs

R-Car Boards

Generation 1

Generation 2

Renesas R-Car Gen2 evaluation boards

	Standard	Low Cost Boards (LCB)
R-Car H2	Lager	Start.Now (Stout)
R-Car M2-W	Koelsch	Porter
R-Car M2-N	Gose
R-Car E2	Alt	SILK
R-Car V2H	Blanche

R-Car Linux

Upstream

Renesas mainline R-Car Linux tree is maintained by Simon Horman

Start here to get latest/closest upstream kernel: git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git

e.g. pull development branch: git clone -b devel git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git

TBD - add page regarding R-Car upstream development process (including branches/tags meaning)

R-Car Community

• Mailing list - via kernel.org linux-sh Majordomo.

Archives available here: http://marc.info/?l=linux-sh , http://dir.gmane.org/gmane.linux.ports.sh.devel , http://www.spinics.net/lists/linux-sh/

LTSI (Long Term Support Initiative)

Renesas SoCs and boards are supported as part of LTSI project - http://ltsi.linuxfoundation.org/ . Refer to 3.10 and 3.14 baselines

Renesas Stable R-Car BSP Tree

Stable Renesas R-Car BSP Tree located here: git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-backport.git. Pull latest stable branch.

for example: bsp/v3.10.31-ltsi/rcar-gen2-1.8.0

R-Car U-Boot

R-Car U-Boot mainline development is done using git://git.denx.de/u-boot-sh.git tree. It is maintained by Nobuhiro Iwamatsu.

e.g. pull renesas/bsp/rcar-gen2-1.8.0 branch and build U-Boot for Lager/Koelsch/Alt boards
git clone -b renesas/bsp/rcar-gen2-1.8.0  git://git.denx.de/u-boot-sh.git

build example

make O=/tmp/build clean
make O=/tmp/build mrproper
make O=/tmp/build gose_config
make O=/tmp/build all

R-Car Yocto

Renesas Yocto/Poky distribution is maintained by Nobuhiro Iwamatsu.

To get started with Yocto on R-Car Gen2 platform - pull git://git.yoctoproject.org/meta-renesas tree

If you pulled complete Yocto/poky trees, you should be able to kick-off a build using the 'oe-init-build-env' script in Poky. Update bblayers.conf by adding the meta-renesas and meta-rcar-gen2 layer. e.g.:

       BBLAYERS ?= " \
               <path to layer>/poky/meta \
               <path to layer>/poky/meta-yocto \
               <path to layer>/poky/meta-yocto-bsp \
               <path to layer>/meta-renesas \
               <path to layer>/meta-renesas/meta-rcar-gen2 \
       "

To build a specific target BSP configure the associated machine in local.conf:

       MACHINE ?= "<supported board name>" (lager, koelsch, gose, alt)

Build the target file system image using bitbake:

       $ bitbake core-image-minimal

R-Car Tizen

TBD Renesas R-Car Tizen is already available via tizen.org trees. Add detailed instructions how to get started with Tizen for R-Car

R-Car Android

TBD This section will be added later